manualshive.com logo in svg

Medonic CA530, User Manual

Share
Download
Medonic CA530 User Manual Download Page 91

QC and Blood Controls

1156en01

03-11-24

91

11.5

Display of Blood Control Data

To display blood control data, enter menu 7.1 which is analogue to (main) menu 
1 but exclusively for control blood. Use the left/right arrow key to display a de-
fined control or type in the control ID manually and use the “+” sign as the ter-
minator. The “+” sign is entered with the right arrow key.

Line 7.1.4 will show the number of control samples selected. 

Enter menu 7.1.4 to refine the search with a date or SEQ (Sequential number) 
window

See example below.

Enter menu 7.1.5 to view the controls and use the up/down arrow keys to scroll 
through the control memory. Size distributions are not saved and displayed for 
blood controls.

Go to menu 7.1.6 to display the mean, SD and CV of the selected data and use 
menu 7.1.7 to print out the selected controls.

Menu 7.1.8 is used to delete the selected control samples from memory.

1174en.gif

1173en.gif

Summary of Contents for CA530













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands