Medivance ARCTIC SUN 5000, Operator'S Manual

Page: 9 / 15

7
Chapter 4 – Hypothermia Settings
Hypothermia Settings
Use the Hypothermia Settings screen to view the current settings and
modify the settings for the following parameters. To modify any parameter
setting, press the
Adjust button to the right of the parameter.
Hypothermia Settings screen parameters:
Therapy Settings
• Cooling Begins
• Rewarming Begins
Water Temperature Settings
• Pre-Condition Water
• Manual Control
• High Water Limit
• Low Water Limit
Patient Temperature Settings
• High Patient Alert
• Low Patient Alert
• Control
Strategy
Display Settings
• Temperature Units
• Temperature Units Adjust
• Patient Temp 2
• Speaker
Volume
To access the Hypothermia Settings screen:
1) Press Adjust on the Cool Patient window or the Rewarm Patient win-
dow.
2) Press the More button on the Cool Patient Adjust window or Rewarm
Patient Adjust window.
3) The Hypothermia Settings screen will be displayed.
4) To save the new settings as the current patient therapy settings, press
the Close button. For instructions on saving the settings as the system
defaults, see Advanced Setup .
Chapter 5 – Advanced Setup
Use the Advanced Setup screen to view the current settings and modify
the settings for the following parameters. To modify any parameter setting,
press the
Adjust button to the right of the parameter.
Location / Time Settings
• Language
• Number
Format
• Current Time
• Date Format
• Current Date
The following functions can be initiated from the Advanced Setup screen.
• Download Patient Data: The Patient Data for the last 10 (ten) cases are
stored on the
A
RCTIC
S
UN
®
Temperature Management System hard drive.
This data is maintained when the
A
RCTIC
S
UN
®
Temperature Management
System is powered down, or in the event of a total loss of power.:
• Calibration
• Total
Drain
• Save All Settings As Default
Additionally, the following information can be viewed in the Advanced
Setup screen.
• Software
Versions
• Last Calibration date
• Next calibration due
To access the Advanced Setup screen:
1) Press Advanced Setup button on the Patient Therapy Selection screen.
2) The Advanced Setup screen will be displayed.
E N G L I S H