62
Probe and consumable operation volumes
Chapter 11 System Maintenance and Care
11.1
System maintenance
Equipment should not be frequently turn on and turn off. If you need to
reboot after power-off, wait 2 to 3 minutes.
Please check whether the system is normal frequently if it has been used
for some time.
When the equipment is not in use for a long time, the instrument should
be cleaned and packed in the direction indicated by the packing box. The
storage environment should be in accordance with the "storage"
condition.
At the end of the day, after cooling, the instrument should be covered with
protective cover to prevent dust from entering.
When the device is prompted “low power level”, it should be charged as
soon as possible in case the battery voltage drops so low due to
excessive discharge that it can’t be normally charged and booted.
Overcharge and over discharge will cause great damage to the lithium
battery. Therefore, better charge in accordance with the standard method ,
in particular, do not carry more than 12 hours of super-long charge.
Summary of Contents for C-Scan
Page 89: ...78...
