Meditech C-Scan, User Manual

Page: 13 / 89

2
spark generated by equipment failure or the fan motor may electronically
detonate these substances.

Do not place the probe in a chemical (e.g. corrosive, degradable,
contaminated) environment to avoid damage to the device / probe due to
strong acid or alkali.
Operators should pay attention to the following points to avoid the risk of such
explosion：

If a flammable substance is detected in the environment, do not plug in or
turn on the system.

If a flammable substance is detected after the system has been turned on,
do not attempt to turn off the device or unplug the power supply.

If flammable substances are detected, ventilate the area before closing
the unit.

Connect the power supply and the ground wire according to the correct
method in the user manual, otherwise there is danger of electric shock.
Do not connect the ground wire to any gas or water pipe, which could lead
to risk of explosion.

Do not use any probes and power adapters other than those supplied by
us. Doing so may cause damage to the unit and the probe. In extreme
cases, a fire accident may occur.

Do not open the case. If the case is opened with power on, there is a
danger of a short circuit or electric shock.

Always keep the machine dry and avoid moving the unit from a colder
place to a warmer place, otherwise condensation or water droplets may