Medit Identica hybrid, User Manual, Page: 49 / 129

48
Identica Hybrid User Guide
Using a jig
Attach the clean scan object to a jig.
Spray the object before attaching it to the jig.
Use tack to attach the scan object to the jig. Shake the jig to make sure it is stable.
Place a jig the direction that matches the grooved underside (it will automatically click to connect).
The front of the model should be facing the user as you can see in the picture below.
If scan data is not correct, additional scans can be performed if needed. After the scan, rotate the image so that the
part needing additional scans is showing in front. Then, click
“ Add scan ”
2
or keyboard shortcut
2
.
Before Add scan
2