Medit Identica hybrid, User Manual, Page: 44 / 129

43
Using Identica Hybrid
How to use Identica scan
When you finish the preparation stage in Identica Software, click the “ Scan ” button to start the scanning program.
Preparation - Strategy
1
Select the type of model to be scanned.
- Stone model or impression
2
Select the abutment for the upper jaw.
- Choose whether to scan an upper preparation using a base or whether to use use a multi-die.
(If you use a base and the preparations are adjacent, divide it into two groups and start scanning. If you use a
multi-die and the number of preparations is over 8, divide them into two group and start scanning. Normally,
use of multi-die is recommended as it saves time.)
3
Set the same scan method for the upper and lower jaw.
4
Set the use for the flexible multi-die.
When this feature is enabled, the scan settings for the upper and lower jaw are disabled.
5
Select the scan strategy for the articulator.
When finished with setup, select OK and move to the next step.
Use a model ’ s base for a single coping/ Select ETC (use articulator plate) for articulators , and select OK
to move to the next step.
Single coping scan (#11)
Order form setup
Running Identica Software.
1
3
4
1
4 3
2
5
6
7
8