background image

5

Safety Precautions

In General

 WARNING:

 This device is not suitable 

for use in the presence of a flammable 
anaesthetic mixture with air, or in the 
presence of a flammable anaesthetic 
mixture with oxygen or nitrous oxide.

 WARNING: 

Bed frames used with the 

systems can vary greatly depending on the 
specific health care setting (ie hospitals, 
nursing homes, home care, etc). It is the 
responsibility of the caregiver to take the 
necessary precautions to ensure the safety 
of the patient. This includes, but is not 
limited to, the appropriate use of side rails 
to prevent falls and/or patient entrapment.

IMPORTANT:

 Minimise articles between 

the system surface and patient, and secure 
bed sheets loosely so as not to affect the 
alternating cell movement.

 WARNING: 

Significant risks of 

reciprocal interference may be posed by 
the presence of the system during specific 
investigations or treatments. Potential 
electromagnetic or other interference 
between the system and other devices 
may occur. If interference is suspected, 
move equipment from sensitive devices or 
contact Medistore.

Control Unit

 Only plug into a grounded power 

receptacle and use the power cord 
supplied with the system.

 Exposure of the electronic  

Control Unit to any liquid while it is  
plugged in could result in a severe 
electrical hazard.

 Medistore recommends placing 

the cord under the bed frame and 
attaching it to an electrical outlet by 
the head of the bed.

 The power cord to the Control Unit 

should be positioned to avoid a 
tripping hazard and/or damage to  
the cord.

 Do not place any objects or items, 

such as blankets, on or over the 
Control Unit.

 The electronic Control Unit is a 

precision electronic product. Use 
care when handling or transporting. 
Dropping or other sudden impacts 
may result in damage to the unit. 
Before attaching the Control Unit 
to the floor or the foot board of 
the bed, ensure they are sufficiently 
robust and free of damage.

 

WARNING: 

Do not open the  

Control Unit – risk of electrical shock. 
Do not attempt to repair or service 
the Control Unit. If parts need to be 
repaired, circuit diagrams and parts 
lists can be provided by Medistore to 
suitably qualified service personnel.

 

WARNING: 

Only use fuses that 

have the same specified rating (see 
Technical Specifications). Using fuses 
with higher ratings could result in  
damage and/or injury.

NOTE: No special skills, training or 
knowledge are required to operate the 
Control Unit.

Summary of Contents for ProCair 3000

















Reviews: