background image

4

Safety Precautions

The purpose of safety precautions are to 
attract your attention to possible dangers. 
The safety symbols and the explanations 
with them, require your careful attention 
and understanding. 

The safety warnings by themselves do not 
eliminate any danger. The instructions or 
warnings they give are not substitutes for 
proper accident prevention measures.

The following symbols may appear in this 
User Guide, on the Control Unit, or on its 
accessories. Some of the symbols represent 
standards and compliances associated with 
its use.

 SAFETY ALERT SYMBOL: 

Indicates 

caution or warning. 

 

WARNING: 

Failure to obey a safety 

warning can result in serious injury  
to yourself or to others. Always follow 
the safety precautions to reduce the 
risk of fire, electric shock and  
personal injury.

 

DOUBLE INSULATION

Double insulation is a safety concept of 
electrical equipment which eliminates 
the need for earth grounding. Whenever 
there is electric current in the Control Unit 
there are two complete sets of insulation 
to protect the user. All exposed metal parts 
are isolated from the internal metal motor 
components with protecting insulation.

 WARNING: 

The double insulated 

system is intended to protect the user from 
shock resulting from a break in the Control 
Unit’s internal wiring. Observe all normal 
safety precautions related to avoiding  
electrical shock.

 WARNING: 

Servicing a Control Unit 

with double insulation requires extreme 
care and knowledge of the system and 
should only be performed by a qualified 
service technician. For service we suggest 
you return the Control Unit to your nearest 
Medistore Authorised Service Centre for 
repair. When servicing, use only identical 
replacement parts.

 

OPERATING INSTRUCTIONS

 WARNING: 

Do not attempt to operate 

this product until you have thoroughly 
read and completely understand the safety 
rules, etc contained in this User Guide. 
Failure to comply can result in accidents 
involving fire, electric shock or serious 
personal injury. Save this User Guide 
and review frequently for continual safe 
operation and for instructing others who 
may use this product.

 

Maximum recommended patient 

weight for this system is 120kg.

 

Only the Control Unit and  

Mattress combination as recommended  
by Medistore should be used, otherwise 
the correct function of this product cannot 
be guaranteed.

Summary of Contents for ProCair 3000

















Reviews: