UP MEVACS M90 - D4O-0085-2-0 / 13.1.2009
T-QN-04/05-01-1
3 / 15
•
Device is protected by a safety valve into the lid of jar and safety valve into the lid of safety jar, and
hydrophobic filter against secret sucking into the vacuum pump. It in spite of this secret is sucked,
further using is possible as late as a control was made. The control can only be provided by a
authorized service organization.
•
Before connecting the mains cord ensure that the local electric mains voltage is 230 V/ 50 Hz.
•
Protect the mains cord against mechanical damage, especially against cutting and short-circuiting.
•
Do not bend the mains cord too much.
•
Pull the plug of the mains cord when unplugging.
•
Never leave the mains cord plugged in electric mains, when unplugged from the unit socket.
•
Attendant must make certain before every use of suction unit about its good condition and device
ready.
•
Don’t expose the collection vessels for direct UV ray of the germicidal lamps
Installation
•
The device should have sufficient air circulation in order to avoid the overheating.
•
Do not put the device on subjects, which could block the vents on the unit bottom part.
•
Do not use or locate the device in the vicinity of heat sources.
Note
•
Do not forget regular replacement of filters.
•
When you are interconnecting the vessels, keep the rule that the vessel input leads through a
direct connector and the vessel output leads through the connector under which the safety
valve is located.
•
When you are autoclaving, the vessels must stand freely upside down, they must not touch each
other and must not be loaded in order to avoid distortions. Max. temperature is 121°C.