Medisana MCN PRO, Instruction Manual

Page: 26 / 130

16
1 Safety instructions
GB
• Always carefully inspect the cable, the control unit and the Shiatsu
massage seat cover for damage before use. Do not attempt to
use a defective unit.
• Do not use the unit if there are visible signs of damage on the unit
or the cable components, the unit does not work properly or the
seat or the control unit have been dropped or become damp. In order
to prevent hazards, always send the unit in to the service centre.
• If the supply cord of this appliance is damaged, it must only be
replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
• The zip fastener on the back of the massage device must not be
opened. It is only fitted for reasons relating to the manufacturing
of the device.
operating the unit
• The Shiatsu massage seat cover must only be used for its intended
purpose as described in the instruction manual.
• Using the Shiatsu massage seat cover for any other purpose
invalidates the warranty.
• Never leave the unit unattended if it is connected to the power
supply.
• The maximum operating time for one session is 15 minutes.
Allow it to cool off for at least 15 minutes before using it again.
• Do not allow the Shiatsu massage seat cover to come into
contact with pointed or sharp objects.
• Never put the unit down next to an electric stove or other
sources of heat.
• Never use the Shiatsu massage seat cover if it is folded up.
• Never use the device under covers, such as blankets or pillows.
• Operate the device in an upright position only, never place it flat
on the floor.
• Make sure that all moving parts can move freely at all times.
• Never sit or stand on the moving parts of the device with all your
weight and do not place objects on the device.