Medisana MCN PRO, Instruction Manual

Page: 32 / 130

22
3 Operating
GB
Vibration button
r
You can enhance the shiatsu massage at any time with a vibration massage for
your thighs by pressing the vibration massage button
r
.
The vibration massage in the upper thigh area can be operated separately.
Switch on the device by pressing O
n/Off button
t
.
Press vibration massage button
r
. The LED located above left illuminates and
the vibration massage motor
6
is switched on. It begins with a gentle
massage. Press button
r
again and the vibration level increases (medium
intensity massage). The LED located in the middle above illuminates. Press button
r
a third time and the vibration level increases (highest intensity massage). The
LED located above right illuminates. After button
r
is pressed a fourth time,
the vibration massage is switched off and the LED extinguishes.
Do not use the massage device for longer than 15 minutes
and then allow it to cool. Using the device for longer can
overstimulate the muscles and cause tension instead of relaxation.
The massage can be finished at any time by pressing the
On/Off
t
button.
After each use, switch the device off using the On/Off button
t
and remove the plug
5
from the mains socket. Always store
control unit
7
in its bag.
To switch off the device
Press the On/Off button
t
. The power LED begins to flash and the massage
heads travel back down to the “Park” position. When this position is reached,
the LED extinguishes. If you press the
On/Off button
t
while one of the
massage functions is switched on, the massages in neck/shoulder and seat just
stop immediately, including heat function. First the massage heads in the back
travel downwards to the “Park” position. The LED flashes meanwhile and then
extinguishes.