Connecting the headphones
Connect the headphones/earphones here.
− Connect the cable to the green socket
12
on the front of your PC with the
3.5mm stereo jack.
WARNING!
Damage to hearing!
Excessive volumes when using headphones or earphones, as well as
changes to the default settings on the equaliser, driver, software or
operating system, can generate excessive acoustic pressure that can
cause hearing loss.
− Before pressing play, set the volume to the lowest setting.
− Start playback and increase the volume to a comfortable level.
Connect microphone
− Connect a microphone to the pink socket
13
with a 3.5mm mono jack.
− Position the microphone so that it is not pointing directly at the speaker.
This will prevent acoustic feedback that creates a loud whistling sound.
Connecting audio input / recording source
This connection is used for connecting external analogue audio sources (e.g.
stereo system, synthesizer).
− Connect the cable to the pale blue socket
14
with the 3.5mm stereo jack.
Connecting the network ( LAN)
You can prepare your PC for network operation using the network
connection.
A network cable normally has two RJ45 plugs so it does not matter which side
is connected to which socket.
− Plug one end of the network cable into the PC socket
27
.
− Connect the other end to the other PC or hub/switch.
You can find more information on this in the section "Network operation” .
−
22
AFTER SALES SUPPORT
AUS
1300 884 987
www.medion.com.au
AUS
Connecting
8804 EN ALDI AUS Content MSN 2006 1605 RC2.indb 22
8804 EN ALDI AUS Content MSN 2006 1605 RC2.indb 22
18.11.2015 14:59:42
18.11.2015 14:59:42
