Medion MD 8818, Instruction Manual

Page: 32 / 114

Connecting
22
Setting the frequency channel or ID
Important!
Do not carry out the following installation steps until
you have put the PC into operation as described on the
following pages.
For a good wireless radio connection, you must ensure the
frequency channel and/or ID of the keyboard and mouse is the
same as that of the receiver.
There are 255 IDs each for keyboard and mouse. Changing the
frequency channel / ID may prevent interference between
devices.
Setting the frequency channel of the keyboard and mouse
1. Push the ‘connect’ button located on top of the receiver. The
indicator will start blinking.
2. Push the button on the bottom of the keyboard and/or the
mouse. The channel will be changed after the button is
released.
Note
Please do not hold the button for more than 3 seconds.
This will change the ID, instead of the channel.
Setting the ID on the keyboard and mouse
1. Push the ‘connect’ button on top of the receiver. The
indicator light on the receiver will start blinking.
2. Hold down the button on the bottom of the keyboard and/or
the mouse for 3 seconds. The ID will change after the button
has been released.