155 of 191
DE
FR
NL
EN
CR 2025
CR 2025
Pull the battery holder with the battery out of the remote control. Comply with
the legal requirements when disposing of the used battery.
Insert a new 3 V CR2025 battery in the holder with the positive terminal facing
upwards. Always make sure the battery is the right way round.
Push the battery holder complete with battery back into the remote control as
far as it will go.
5.3. Mounting the radio
The under-cabinet radio is for mounting to the underside of a wall cabinet or shelf
unit. To mount the device, you will need 8 screws (included in the delivery). The size
and length of the screws must match the mounting plate and bracket.
Select a suitable space near a mains socket.
Remove the cover by pulling it back (in the direction of the arrow) and off the radio.
Use the mounting bracket or the template to mark the drill holes (1).
Drill 8 holes on the underside of the shelf unit (where you made your markings)
in order to fix the screws.
Screw the mounting bracket to the bottom of the cabinet or shelf. Make sure
that UP faces up and FRONT faces to the front.
Now place the device onto the notch of the mounting bracket and carefully
push the device back until it audibly clicks into place (2).
Make sure that the wire aerial does not get caught.
87466 MULI eCommerce Content RC1.indb 155
87466 MULI eCommerce Content RC1.indb 155
03.11.2015 10:37:35
03.11.2015 10:37:35
