24 of 40
Telephone:
1300 884 987
Internet: www.medion.com.au
After Sales Support
8. Taking
photos
Slide the function selection switch
to the desired position
.
Hold down the
P O W E R
button for
2 seconds. The camera will vibrate
briefly 3 times to signal that the
device is now switched on.
The operating LED will light up blue when the
device is switched on.
Press the
R E C O R D
button. The camera will
vibrate briefly 2 times and then automatically takes
the photo of the desired subject.
Press the
R E C O R D
button again to take another
photo
NOTE!
The recording LED only lights up if a
memory card has been inserted into
the device.
If there is no memory card inserted
in the device or the card has been in-
correctly inserted, the charging LED
on the rear of the device will blink.
86692 50044461 EN ALDI AUS Content final.indd 24
86692 50044461 EN ALDI AUS Content final.indd 24
17.09.2013 07:55:32
17.09.2013 07:55:32
