23 of 40
Telephone:
1300 884 987
Internet: www.medion.com.au
After Sales Support
7. Recording
videos
Slide the function selection switch
to the desired position
.
Hold down the
P O W E R
button for
2 seconds. The camera will vibrate
briefly 3 times to signal that the
device is now switched on.
The operating LED will light up blue when the
device is switched on.
Press the
R E C O R D
button. The camera will
vibrate briefly 3 times to signal that the camera
is recording. The recording LED will light up red
during recording.
Press the
R E C O R D
button again. The camera will
vibrate briefly once to signal that the recording has
ended and it has been saved.
NOTE!
The recording LED only lights up if a
memory card has been inserted into
the device.
If there is no memory card inserted in
the device or the card has been
incorrectly inserted, the charging LED
on the rear of the device will blink.
86692 50044461 EN ALDI AUS Content final.indd 23
86692 50044461 EN ALDI AUS Content final.indd 23
17.09.2013 07:55:31
17.09.2013 07:55:31
