Medion LIFE P89626 MD 86407 User Manual Download Page 10

Page: 10 / 106

Telephone:

1300 884 987

Internet: www.medion.com.au

After Sales Support

• For extra safety, we recommend using an overvoltage protection device to

prevent the appliance from sustaining damage as a result of power surges
or lightning strikes.

• To interrupt the power supply, unplug the mains adapter from the socket.
• The mains adapter must be easy to access even after being connected so

that it can be quickly disconnected from the mains, if required.

• To avoid overheating, do not cover the mains adapter.
• If you use an extension cable, make sure that it complies with Australian

requirements. If in doubt, contact an electrician.

• Position the cables so that no one can step on or trip over them.
• Do not place any objects on the cables, as this could damage them.

Note on electrostatic charge

If the device does not function properly due to electrostatic charge, reset it by
temporarily disconnecting it from the main power.

86407 EN ALDI AUS RC1 Content.indd 9

04.11.2011 09:23:10

Summary of Contents for LIFE P89626 MD 86407











































































































Search results

Summary of Contents for LIFE P89626 MD 86407

Reviews:

Related manuals for LIFE P89626 MD 86407

Brands by name

Popular brands

Medion LIFE P89626 MD 86407, User Manual

Search results

Summary of Contents for LIFE P89626 MD 86407

Reviews:

Related manuals for LIFE P89626 MD 86407

Brands by name

Popular brands