21
Telephone:
1300 884 987
Internet: www.medion.com.au
After Sales Support
The RESET button
The RESET button on the back of the NAS server is used to reset the NAS server
in case you have to reset the system or have lost your administrator password.
You can press in the RESET button with a pointed object (a paper clip, for
example).
Resetting the administrator password
To reset the administrator password to the standard password (user name:
admin; password 1234) hold down the RESET button for about 3 seconds
until you hear a short beep.
You can now log on to the NAS server with the standard password.
Resetting the system to the standard settings
If the NAS server has a faulty response, or if settings that have been made have
caused you to lose your access to the system, it may be necessary to reset the
system to the standard settings.
To reset the system, keep the RESET button pressed down for about 10
seconds. After 3 seconds you will hear a fi rst short beep and a second short
beep after 10 seconds.
Now release the RESET button. As confi rmation you will hear three short
beeps. The system will now be reset to the standard settings and restarted.
PLEASE NOTE!
Resetting the standard settings will also reset the administrator
password!
All data on the hard drive will be retained when resetting to the
standard setting! Only the system settings will be reset.
86407 EN ALDI AUS RC1 Content.indd 21
86407 EN ALDI AUS RC1 Content.indd 21
04.11.2011 09:23:12
04.11.2011 09:23:12
