66
Radio functions
Selecting the band
Press the
B N D
button to change between the VHF bands (FM1, FM2, FM3) and
medium wave (MW) bands.
You can store up to 6 stations in each of the four bands.
NOTE!
The three VHF frequency bands FM1, FM2 and FM3 all cover the same fre-
quency range (87.5 to 108 MHz), which means that you can save up to 18
stations in the VHF band.
Search for a station
Briefly press one of the buttons
or
on the remote control to start searching for
stations automatically. The device will search for the next station automatically.
Press one of the buttons
or
on the remote control to stop searching for sta-
tions automatically.
Press and hold down one of the buttons
or
on the remote control until the
message
MANUAL
appears in the display.
You can manually change the station frequency upwards or downwards with the
button
or
on the remote control.
NOTE!
You can also search for stations from the device by using the buttons
T R K
or
T R K
.
Search for stations with alternative frequencies (AF)
Stations that broadcast an AF signal broadcast alternative frequencies that also broad-
cast the selected station, so that you can receive the same radio programme over lon-
ger distances. (You can find details on this service in section „Radio Data System“ on
page 67.)
Press the
B N D
button to select the frequency in which you would like to search for
and, if necessary, store the station.
Press the
S C A N
button (remote control) to search through the FM band for sta-
tions broadcasting an AF signal.
The scanning process stops for 5 seconds each time it finds a station and then con-
tinues.
If you want to listen to or store the station, press the
S C A N
button to stop the
scanning process.
83296 ML eCommerce Content RC1.indb 66
83296 ML eCommerce Content RC1.indb 66
15.03.2012 16:47:07
15.03.2012 16:47:07
