60
Information on the cables
NOTE!
The information on the cables is to be used if the cables are to be laid in-
dividually. To do so, contact a specialist workshop and hand over the ISO
plug supplied and the information from this section.
You do not need the following information to connect the radio to the ISO
plugs in your vehicle.
Two ISO connectors with cables are supplied:
• Connecter with electric cables for ISO socket block A
• Connector with speaker cables for ISO socket block B
Overview of ISO socket A: Power
Black: Earth
Terminal 31
Blue: Power output antenna
5
7
4
8
A
Red: Ignition lock (switched plus)
Terminal 15
12 V+
Yellow: Memory Back-Up (permanent plus)
Terminal 30
12 V+
Memory back-up (yellow)
The yellow memory back-up cable must be connected with the permanent plus. Oth-
erwise the station memory function will not work.
Antenna relay cable (blue)
The blue cable is available for a relay-controlled antenna. The relay extends the anten-
na automatically when the radio is switched on. When it is switched off the antenna is
retracted.
This relay cable can also be used to control an external amplifier. Please refer to the
amplifier's operating instructions for the correct connections.
CAUTION!
Never connect the blue cable directly to a consumer such as a motor antenna
or an amplifier; this can damage the radio!
83296 ML eCommerce Content RC1.indb 60
83296 ML eCommerce Content RC1.indb 60
15.03.2012 16:47:02
15.03.2012 16:47:02
