57
DE
NL
EN
IT
FR
ES
DK
Connections on the back of the radio
Overview of the back of the radio:
1
2 3
4
5
6
1) Antenna
socket
2)
Video output socket (yellow)
3)
Audio output sockets (red/white)
4)
ISO socket block B (speaker)
5)
ISO socket block A (power)
6)
Fuse 15 A
Prepare the cable connections
Pull the connections in the ISO slot of your car out far enough that you can con-
nect them to the connections on the car radio.
Connect the cables
NOTE!
Please use the car radio's ISO block and the DIN antenna socket for instal-
lation.
If your car's ISO block and antenna connection do not match the car ra-
dio's ISO sockets and antenna connection, you can buy appropriate adapt-
ers in specialist workshops, retailers or department stores.
The two ISO plugs in your vehicle create safe and correct electrical
connections (for the speakers and power connections). If, however, you want to lay
cables individually, we will explain the relevance of the cables at the end of this sec-
tion.
Connect the vehicle's antenna plug to the car radio's antenna socket.
If you want to use an external amplifier, you can connect it with the red/white au-
dio cinch sockets. Please refer to your instructions for the amplifier.
Connect the two ISO plugs on the vehicle with the two ISO blocks on the car radio
(A for power and B for the speakers).
83296 ML eCommerce Content RC1.indb 57
83296 ML eCommerce Content RC1.indb 57
15.03.2012 16:46:59
15.03.2012 16:46:59
