manualshive.com logo in svg

Medion ERAZER X7815, User Manual, Page: 98 / 102

Share
Download
Medion ERAZER X7815 User Manual Download Page 98

 

Information about conformity 

91

Safety 

Handling 

Comp

one

n

ts 

Aid

 

Appendix 

FCC Compliance Statement 

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected. 

 

Consult the dealer or an experienced technician for help. 

Changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate the equipment. Shielded 
interface cables, if any, must be used in order to comply with the emission limits. 

Copying this manual 

This document contains legally protected information. All rights reserved. Copying 
in mechanical, electronic and any other form without the written approval of the 
manufacturer is prohibited. 

Summary of Contents for ERAZER X7815







































































































Reviews:

No comments