Medion ERAZER X7815, User Manual

Page: 91 / 102

Customer Service
84
Maintenance
Warning!
There are no user-serviceable or user-cleanable parts inside the
notebook housing. Never open the notebook housing.
Following these measures can extend the lifetime of your notebook:

Before cleaning, always remove the power adapter plug and all connecting
cables.

Only use a damp, lint-free cloth to clean the notebook.

Do not use any solvents, corrosive or gaseous cleaning agents.

Dust or grease on the touchpad will impair its sensitivity. Remove dust or
grease on the surface of the Touchpad with a strip of sticky tape.

Dust, which will close the cooling slots, can collect inside the
laptop/notebook in the course of time. This will lead to an increase in the
rotation of the ventilator and consequently also of the operating noise of
your laptop/notebook. In addition, this can lead to overheating and
malfunctions. Have the inside of the laptop/notebook cleaned by your
Service Center or a professional for this reason.
Care of the TFT Display

Always close the notebook when not in use. Avoid touching or scratching
the surface of the screen as it is easily damaged.

Make sure that no water drops are allowed to remain on the screen. Water
can cause permanent discoloration.

Clean the screen with a dry, soft, lint-free cloth.

Do not expose the screen to bright sunlight or ultraviolet radiation.

The notebook and its packaging are recyclable.
Note
Protective foil is on the surfaces to protect the device against
scratching during production and transportation. Pull off all the foil
after you have set up the device correctly and before bringing it into
operation.