Medion Akoya LS, Manual

Page: 27 / 102

T
H E
PC C
A R D
S
L O T
27
32-bit CardBus Port
CardBus cards have a 32-bit architecture with which high data transfer
speeds of up to 132 MB can be achieved, similar to PCI. In this way your
Notebook can also support data intensive devices such as 100Mbps Fast
Ethernet, Fast SCSI peripherals and video conferencing devices.
The CardBus port is backward compatible with 16-bit PC cards with a 5V
power supply, though the CardBus only requires a power-saving 3.3V.
Use of PC-cards
In order to run a PC card, special software is needed (drivers, etc.). The card
manufacturer usually supplies this software. Support for the card port is a
component of Windows
®
and at present represents the optimum in
operational smoothness. You should consider this point when choosing
between alternative operating systems.
Installing a PC card
Follow the PC card installation instructions that are given for use under
Windows
®
and have the necessary driver software ready. Once you have
started Windows
®
, insert the card carefully into the slot provided.
When the card is fully inserted two audible signals will be heard, provided it
has been correctly recognized and successfully configured.
If only one signal is heard, this signifies a problem with the card recognition.
In this case, follow the instructions that accompany your new PC card.
Removing a PC card
To remove your PC card, press the eject button next to the slot.