Medion Akoya E7220, Instruction Manual

Page: 102 / 108

After Sales Support TEL: 1 300 884 987 WEB Support: www.medion.com.au
95
Safety
Handling
Comp
one
n
ts
He
lp
Appendix
Information about Conformity
The device fulfils electromagnetic compatibility and electricity safety requirements.
Your device complies with the basic requirements and the relevant Australian EMC
guidelines [electromagnetic compatibility] and the Australian electrical safety guidelines.
This device fulfils the basic requirements and the relevant regulation of the Ecodesign
Guideline 2009/125/EG (Commission Regulation 1275/2008).
ISO 13406-2 Class II
Active matrix LCDs (LCD) with a resolution of 1600 x 900 pixel, which are in turn
composed of three sub-pixels each (red, green, blue), contain about 4.3 million
addressable transistors. Because of this very high number of transistors and their extremely
complex production process occasionally defective or incorrectly addressed pixels or sub-
pixels may occur.
There have been several attempts in the past to define the acceptable number of defective
pixels. But this can be difficult and varies widely between different manufacturers.
We, therefore, adhere to the clear and strict requirements of ISO 13406-2,
class II , for the warranty handling of all LCD display products. These requirements are
summarised below.
Within ISO-standard 13406-2 the general requirements regarding pixel defects are defined.
Pixel defects are classified into three failure types and four failure classes. Each individual
pixel is made up of three sub-pixels in the primary colours (red, green, blue).