34
21.2. Inserting the Flash Memory Expansion Module
Proceed as follows:
`
Switch off the notebook by shutting it down properly.
`
Turn the notebook over and lay it down on a stable and even surface to prevent
the notebook from falling.
`
Remove the marked screw on the underside of the notebook and remove the
cover from the flash memory expansion module.
`
Remove the screw from the slot.
`
Push the flash memory expansion module into the slot with the contacts facing
towards the right and fix it in place using the previously removed screw.
`
Replace the cover and screw it back on securely.
As long as the additional memory is already formatted or contains data, the
operating system will recognise and include the new disk.
If you have any problems inserting the memory expansion module, read
chapter „25. FAQs – Frequently Asked Questions“.
21.3. Removing the Flash Memory Expansion Module
Proceed as follows:
`
Switch off the notebook by shutting it down properly.
`
Turn the notebook over and lay it down on a stable and even surface to prevent
the notebook from falling.
`
Remove the marked screw on the underside of the notebook.
`
Use your fingernail to lift up the cover and remove it.
`
Remove the screw from the slot and remove the flash memory expansion
module.
`
Fit the previously removed screw back in the slot so that you do not lose it.
`
Replace the cover and screw it back on securely.
