Helpline No. UK/ North Ireland 0871 37 61 020 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: 83388
13
7.
Use the number keys to select the preferred code from the
code list. After you enter the fourth digit, the confirmation
message
SUCCESS
is displayed.
The remote control returns to normal operation.
If an incorrect code is entered, the error message
CODE ERROR
appears. – The universal remote control then switches to normal
operation.
Manual code search
You can use the manual code search to find all of a device's codes, including those that
are not shown in the code list.
1.
Switch on the device to be controlled.
2.
Keep the
Setup
key pressed down for approx. 3 seconds,
until
CODE SETUP
appears.
3.
Press
OK
.
LIST CODES
now appears in the display.
4.
Use the arrows
(press twice) to select the
SEARCH CODES
menu.
5.
Press
OK
" The
MODE KEY
display appears.
6.
Press the required mode key (
TV
,
VCR
,
DVD
,
CD
,
ASAT
,
CBL
,
AUX
,
DSAT
). The
DEVICE TV
display appears.
7.
Use the arrows to select
the device type to be
programmed on this mode key. (If you select "
TV
" it is not
possible to select a device type because only TV codes can be programmed on the
TV
mode key.)
Please refer to the list and table above.
8.
Press
OK
. The
SEARCH KEY
display appears.
9.
Perform the function test now by pressing the
PROG+,
or
PLAY
(VCR only) keys (up to 350 times) until the device
changes channels, switches off or responds accordingly.
The code search begins with the code that is currently
stored. While the search is running, the word
SEARCHING
(along with the selected
device type) is displayed.
If you miss the code, you can go back step by step with the
PROG–
key.
10.
When the device responds accordingly each time a key is
pressed, press
OK
to save the code. The
SUCCESS
confirmation message appears.
The remote control returns to normal operation.
