Customer Service 1-888-707-1880
Dyaco Canada Inc. 2015
Email:
8
MR100 Electronic Console:
Power on
When initially powered on the console will perform an internal self-test. During this time all the
lights will turn on for a short time. The dot matrix display will then show a software version (i.e.
VER 1.0) and the message window will display an odometer reading. The odometer reading
displays how many hours the bike has been used and how many virtual miles the bike has been
ridden. The display will look like this: ODO 123 MI 123 HRS.
The odometer will remain displayed for only a few seconds then the console will go to the start up
display, also known as Idle Mode. The dot matrix display will be scrolling through the different
program profiles and the message window will be scrolling the start up message. You may now
begin to use the MR100.
The console will automatically power down after 20 minutes of inactivity. Press any key to wake
the console up again. Always turn off the main power switch when the MR100 is not in use.
CHANGE
GRAPHIC
DISPLAY
PROGRAM
KEYS
MESSAGE
WINDOW
CHANGE
DATA
DISPLAYED
DOT MATRIX
DISPLAY
RPM SCALE
FOR
ISOKINETICS
ONLY
PROGRAM
KEYS
SET UP
KEY
FUNCTION
KEYS
