18
© 05.2022
50
51
8.3 Table of Screw Tightening Torques M
A
Item
no.
R51 / 025
50
M6 / 8 Nm
51
M6 / 8 Nm
8.4 Lubricants Table
Components (apply a thin layer)
Lubricants
Article no.
All O-rings
Syntheso Proba 270
SYNTHESO-PROBA-270
All fastening and locking screws
Anti Seize AS 450
AS-450
Oxygen model
For oxygen models, a suitable grease which is approved for the use
with oxygen must be used.
8.2 Maintenance Procedure
The maintenance procedure is described in detail step-by-step in our video tutorial and our pictorial descriptions.
Instructions for our products can be found in the download area of our website. Should you have any problems, please
feel free to contact us directly.
If components have been removed, make sure they are mounted correctly, reinstall all fastening
elements and observe the screw tightening torques. (see Table 8.3)
Prior to recommissioning, observe the following:
•
Make sure that all maintenance work has been carried out and completed in accordance
with the data and information given in these instructions.
•
Make sure that no unauthorized persons stay in the danger zone.
•
Make sure that all covers and safety devices have been installed and are working properly.
For recommissioning, please refer to the relevant manufacturer's documentation of the gas pressure regulator installed
in the system, the work instructions of the system operator, and the other safety regulations of the system in which the
gas pressure regulator has been installed.
To guarantee smooth operation, we recommend always keeping a maintenance set in reserve.
ATTENTION
DANGER
Note
ATTENTION