![background image](http://html.mh-extra.com/html/medela/invia-liberty/invia-liberty_clinician-instructions-for-use_1759694029.webp)
29
EN
Battery charging
The capacity of the battery is not negatively affected if it is charged when partially discharged and the
pump does not need to be fully charged at each occasion.
The battery must be fully charged before first usage. To
charge the battery, plug the charger into the electrical outlet
port in the Invia Liberty pump. You can continue to use the
pump while it is charging.
The battery can be charged when appropriate, or in accordance with alarm signal for “Battery
low” or “Battery fully discharged (empty)” and instructions in the pump display.
There is approximately 30 minutes of charge remaining on the battery at the onset of the “Battery low” warning.
If the battery is completely discharged it will take 3 to 4 hours to charge to full status.
If the Invia Liberty pump is fully charged AND the pump is still connected to an electrical source,
will appear in the battery icon.
If the pump is disconnected from an electrical source, 4 bars are visible in the battery icon which indicates
that the battery is fully charged.
If Invia Liberty pump has not been in use, the battery must be charged approximately once every
6 months to ensure optimum function.
To disconnect Invia Liberty pump from the electrical source, remove the charger connector and close the
safety cover.
WARNING
Do not pull on the cable or the anti-bend protection.