Medel SYMFIT 6.1, User Manual

Page: 28 / 40

28
Low battery beep
Indicates that the battery has to be replaced. The low
battery beeps are longer than the program change
beeps and their frequency is 250 Hz below the program
change beeps. The beep occurs 20 seconds after the
battery supply voltage falls below a defined threshold,
subsequently every five minutes. The loudness of both
alert tones can be set in 5 dB steps from 15 dB to 105
dB. To demonstrate the program change beeps press
the Play alert tone button.
figure 31
REMARK:
If the alert tone is enabled in one program, all
activated listening programs are affected. The beep
frequency and loudness of the alert tones can be
changed independently for each program.
REMARK:
In case that the battery supply voltage falls below a
defined threshold, the Amadé switches into a power
management state with a reduced output of 18 dB.
The Amadé can still be detected via HIPRO in this case
but Connexx will ask the user to replace the battery
before the fitting is continued.