manualshive.com logo in svg

MEDAP 5752 4916, Operating Instructions Manual

Share
Download
MEDAP 5752 4916 Operating Instructions Manual Download Page 20

Taking the unit out of operation

Taking the unit out of operation

20

GA 5752 4981 GB 15

5

5 

Taking the unit out of operation

5.1 

Taking the unit out of operation

WARNING!

Disengage!
When the product is disengaged (removed) from the terminal unit, the pressure 

energy may cause recoil.
Use the terminal unit in parking position or support when disengaging.

NOTE

To protect the product from damages, cover with cloths when storing.

NOTE

Refer to the medical gas distributor instructions for information regarding detaching 

the gas probe from the terminal unit.

All versions:

 

After having completed the treatment, close the adjustment screw by turning it clockwise and 

check to ensure that it is closed.

 

Disconnect the tapping unit / gas probe from the terminal unit.

Version B: Tapping unit with rail clamp

 

Remove the unit from the equipment rail. For this purpose, open the handle screw and lift the 

unit off the equipment rail.

Summary of Contents for 5752 4916

































Reviews:

No comments

Brands by name

Popular brands

Load more brands