6
silverlight - manual of use and maintenance
01.3 Identification plate of the silverlight handpiece
The Silverlight handpiece serial number is engraved on the shell near the back steel ring nut
(Fig.2 - Ref.A).
02.0 Testing
02.1 Testing of the equipment
All equipment, including all components, is thoroughly checked and tested by the manufactured Mectron.
During the testing procedure the components are subjected to a number of operational work cycles.
This procedure ensures proper functioning and reliability of all components.
03.0 Delivery
03.1 Delivery of the device
The equipment contains electronic components that may be damaged by impacts even inside the
packaging.
Special care must therefore be taken during both transport and storage.
In order to avoid crushing, do not place cartons on top of one another.
All material shipped by GC America Inc. is checked at the time of shipment.
The equipment is delivered properly protected and packaged.
If the shipping packaging is damaged or the protective material shows signs of stress, immediately notify
the carrier.
Keep the shipping material for carrier inspections.
Fig. 2
A
