14
© MECON GmbH BA / mag-flux T4 / EN / 19-04
INSTALLATION AND MODE OF OPERATION
The measuring electronics and all operating elements within the transducer now have this
potential too.
Installation and repair
Installation or repair may only be carried out by specially trained personnel, i.e. trained
electronics technicians or service technicians from MECON GmbH.
Warning!
Before such interventions, the equipment must be completely switched
off, all external devices be disconnected and it must be verified that the
system is no longer live! Only original parts may be used for repair.
MECON GmbH assumes no liability for any damages caused by improper repairs, use of
replacement parts, external electrical or mechanical influences, overvoltages or lightning.
Under such circumstances the warranty is invalid. Likewise, no liability whatsoever is
accepted for any resulting consequential damages.
If there is a fault, the service department at MECON GmbH is available to help you
Tel:
+49 (0)2237 - 6 00 06 - 0
Fax:
+49 (0)2237 - 6 00 06 - 40
Email: [email protected]
Our customer service is at your disposal to provide coordination and assistance with any
necessary diagnostic and repair measures required
Safety instructions for the user
This documentation contains the information required for the intended use of the product
described therein. It is intended for qualified personnel. Within the meaning of the safe
-
ty instructions in this documentation or the product itself, qualified personnel are those
persons who
»
either as an electronics technician or
»
a member of maintenance personnel
are familiar with the safety regulations that apply to electrical and automation engineering
and the regulations applicable in your country. They must be authorized by the plant oper-
ator for installation, commissioning, maintenance or repair.
