3.3.7
force (See Fig. 5).
Data Output
The CFG+ has RS232 output. It is possible to transmit the displayed reading to peripheral devices (e.g. PC,
printer) by pressing and releasing the
TXD
TXD
key.
Displayed readings can also be requested individually from a PC via the RS232 interface by sending a “?” (ascii
D63 [3fh]) character.
For sending a continuous data stream to a PC, press and hold the
TXD
TXD
key for 2 seconds and release. A ‘1’ will
now appear in the display to indicate that data can now be sent (See Fig. 6). To stop sending data, simply press
and release the
TXD
TXD
key, at which point a ‘1’ will disappear from the display.
CFG+ uses:
CFG+ uses:
9600 or 115200 Baud
9600 or 115200 Baud
8 data bits
8 data bits
1 start bit
1 start bit
1 stop bit no parity
1 stop bit no parity
A data cable is available as an optional extra to connect your gauge to peripheral devices
A data cable is available as an optional extra to connect your gauge to peripheral devices
10
Summary of Contents for CFG+
Page 15: ...3 8 2 Rear View 15 ...
