4
Mecmesin
CAPTEST
Operator Manual
that both the device to be connected and your
CAPTEST
are
switched off before connecting.
RS-232 protocol: 9600 baud, 8 bit, 1 stop-bit, no parity, no handshake
Overload
CAPTEST
is overload-protected by a mechanical end stop.
This protection prevents the internal sensor from being
damaged. The scale range, however, does not extend to this
load range. If the scale range is exceeded, ‘oL’ (overload) is
displayed.
Maintenance, cleaning, repair
CAPTEST
is largely maintenance-free. The spindle drive of
the clamping fixture has to be greased occasionally. Please
clean the parts with a soft, moistened cloth and don’t use any
strong cleansing agents or solvents. Repairs will only be
done by the manufacturer. If a repair is required, please
return your
CAPTEST
to your distributor and describe any
damage or faults you have identified.
Calibration
CAPTEST
is calibrated carefully, so the precision of the
measurement will be guaranteed for one year. After that time
it is recommended to have the device checked annually by
the manufacturer.
You can also have the device recalibrated and certified. If
you do your own calibration, it is done in the following way:
switch the device off
press and hold the
ZERO
key
press the
ON
key while holding the
ZERO
key
