CAPTEST
Operator Manual
Mecmesin
3
General Operating Instructions
Before using
On delivery, please check your
CAPTEST
for damage and
completeness. Should there be any defects, inform your
CAPTEST
distributor immediately.
Screw the vertical grips into the clamping fixture, ensuring
a centred and symmetrical arrangement.
Charge the internal battery with the mains adapter
provided: connect the charger to the
CAPTEST
before
plugging it in.
The device can be operated with the mains adapter connected.
Battery management
CAPTEST
is equipped with a modern power-saving
technique to achieve a relatively long operating time. If you
don’t use the device for a period of 2 minutes, it will switch
off automatically. To take new measurements, press the
ON
key;
CAPTEST
is immediately ready to use. The readings
remain stored if the device is switched off manually or
automatically. When the maximum operating time is
reached, the symbol ‘BAT’ is displayed. Please charge your
CAPTEST
as soon as possible as described above. If you
continue using the device without loading, it will switch off
automatically shortly afterwards in order to prevent the
battery from low-level discharge.
Interfaces
The interface plug is placed at the rear of the device. An
RS232C or a DIGIMATIC cable can be connected. Be sure
