Mecmesin AN Series, User Manual

Page: 8 / 12

page 7
10. MAINTENANCE
a) Ensure that any accessory used has the necessary rated capacity other wise the gauge,
operator or sample could be damaged.
b) When using on a Mecmesin test stand, please use the 4 x M3 screws provided to secure the
mounting bracket (Part No 408-471-F99).
c) Do not apply load exceeding the rated capacity of the gauge.
d) Do not use your gauge in a place of low or high temperature and humidity please see
specification table for recommended operating environment.
11. PACKAGING CHECKLIST
Name Quantity
Analogue Gauge 1
Extension Rod 1
Hook 1
Compression Plate 1
Cone Point 1
Inverted Chisel 1
Chisel Point 1
M3 Screws 4
User Manual 1
Calibration Certificate 1