Air & Surface Steriliser System
INSTALLATION & OPERATING MANUAL REVISION: 04/2020 | page 5 of 16
Chapter 4. STRUCTURE
HYGENIKX UNIT
LAMP
BATTERY
A
Air inlet vent
I
UV lamp
N
ER14250 battery
B
Power cable
J
Cap – colour coded
O
Battery compartment
C
Air outlet vent
K
Sheath
(food safe lamps only)
P
LED battery warning light
(with audible alarm)
D
Aluminium air diffuser plates
L
Quartz part of lamp
E
UV lamp base
M
End terminal
F
Safety microswitch
G
Lid
H
On/Off indicator light
Chapter 5. LOCATION ADVICE
For general advice – refer to Section 9.4.11
The unit should be placed in a ventilated area. Some initial odour caused by the electrical components will be
released. After one or two days the odour will disappear. The HyGenikx unit is designed to be wall mounted,
vertically installed, with the logo and cable at the top of the unit. The bottom of the unit should be at a minimum
height of 1.8m AFFL.
•
Do not install the unit in a position where the air inlet and outlet could be blocked. This will affect
its efficiency.
•
Avoid installing in close proximity to mechanical extraction and open windows.
