DOC. MEUM-131205700. Version 01
adjust the gear position of output for the corresponding model, so as to ensure the surgery completed in a
safe and effective way.
5.5
System Shut Down:
1.
Press the power supply switch to the position of “ ”, and wait for below 5 seconds until all lights at
the host device are off.
2.
Remove the probe from treatment handle and unplug the handle from the host device.
3.
Deal with the SINGLE USE probes, and disinfect the handle for future use.
5.6
Transportation and Storage
5.6.1
Transportation
1.
This device can be transported by automobile, by train, by ship and by air.
2.
Before transportation, pack it well, to avoid it from shaking severely, crashing or even falling off. On
the outer pack, to show the marking of “Upwards”, “Handle with Care”, “Weather Proof”.
5.6.2
Storage
This device should be stored in a well-ventilated room without corrosive gas. The height above ground and
the distance from wall should be above 30cm. Stack limit is 6 cases. Before being stored for a long time, it
should be cleaned thoroughly for proper packing and storage. And it should also be taken out for power up
every year, in order to avoid it from moisture, mildew or even damage. The suitable weather and
environment condition is as below:
1.
Temperature: -40
℃～
+55
℃；
2.
Relative humidity: ≤90
％；
3.
Atmospheric pressure: 50kPa
～
106kPa
5.7
Regulations on Scraped Equipment
The device contains integrated circuit, so it must be treated according to the local government regulations
and policies about the scraped electronic devices. And the accessories like probes and hand pieces should
be treated by the professional callback organizations of medical castoffs.