Mec Micro 13-XD, Service & Parts Manual

Page: 18 / 88

Page 14 Mcro 19-XD - Servce & Parts Manual
June 2020
General Machine Maintenance
Instructions in this portion of the manual are to be used in conjunction with the Pre-Start, Frequent
and Annual Inspection checklists found in this machine’s Operator’s Manual.
IMPORTANT: Scheduled maintenance inspection checklists are included in the Operator’s
Manual for use only by qualified service technicians������ Only qualified service
technicians may perform repairs to the machine������ After repairs are completed,
the operator must perform a Pre-Start Inspection before proceeding to the
Functions Test������
HYDRAULIC FLUID UNDER PRESSURE CAN PENETRATE AND BURN
SKIN, DAMAGE EYES, AND MAY CAUSE SERIOUS INJURY, BLINDNESS,
AND DEATH������ REPAIR LEAKS IMMEDIATELY������ FLUID LEAKS UNDER
PRESSURE MAY NOT ALWAYS BE VISIBLE������ CHECK FOR PIN HOLE
LEAKS WITH A PIECE OF CARDBOARD, NOT YOUR HAND������
NEVER PERFORM WORK OR INSPECTION ON THE MACHINE WITH
THE PLATFORM ELEVATED WITHOUT FIRST BLOCKING THE SCISSOR
ASSEMBLY WITH THE MAINTENANCE LOCK (SEE THE INTRODUCTION
PORTION OF THIS MANUAL)������
PERFORM SCHEDULED MAINTENANCE AT RECOMMENDED
INTERVALS������ FAILURE TO PERFORM SCHEDULED MAINTENANCE
AT RECOMMENDED INTERVALS MAY RESULT IN A DEFECTIVE OR
MALFUNCTIONING MACHINE AND MAY RESULT IN INJURY OR DEATH
OF THE OPERATOR������ KEEP MAINTENANCE RECORDS CURRENT AND
ACCURATE������
IMMEDIATELY REPORT ANY DAMAGE, DEFECT, UNAUTHORIZED
MODIFICATION OR MALFUNCTION TO YOUR SUPERVISOR������ ANY
DEFECT MUST BE REPAIRED PRIOR TO CONTINUED USE������ DO NOT USE
A DAMAGED, MODIFIED OR MALFUNCTIONING MACHINE������
Never leave hydraulic components or hoses open������ Plug all hoses and
fitting immediately after disassembly to protect the system from outside
contamination (including rain)������
Never open a hydraulic system when there are contaminants in the air������
Always clean the surrounding area before opening hydraulic systems������
Use only recommended lubricants������ Improper lubricants or incompatible
lubricants may cause as much damage as no lubrication������
Watch for makeshift “fixes” which can jeopardize safety as well as lead
to more costly repair������
Inspection and maintenance should be performed by qualified personnel
familiar with the equipment������
General Machine Maintenance
Secton 10 - Mantenance