manualshive.com logo in svg

Mec Micro 13-XD, Service & Parts Manual

Share
Download
Mec Micro 13-XD Service & Parts Manual Download Page 15

Page 11

Mcro 19-XD - Servce & Parts Manual

June 2020

Emergency Systems and Procedures

IF THE CONTROL SYSTEM FAILS WHILE THE PLATFORM IS ELEVATED, 
HAVE AN EXPERIENCED OPERATOR USE THE EMERGENCY LOWERING 
PROCEDURE TO SAFELY LOWER THE PLATFORM������

DO NOT ATTEMPT TO CLIMB DOWN ELEVATING ASSEMBLY������

Emergency Stop

ART_3353

The machine is equipped with an EMERGENCY STOP switch at the base 
controls and the platform control box.

Press the EMERGENCY STOP switch at any time to stop all machine 
functions.
Pull switch to reset.
Either switch will stop all machine functions.
Both switches must be reset or machine will not operate.

•

•
•
•

Emergency Lowering

ART_4986

Emergency

Lowering

Knob

The Emergency Lowering System is used to lower the platform in case of power failure.

To lower the platform, pull the Emergency Lowering Knob, located near the Base Control panel.

Secton 8 - Emergency Systems and Procedures

Emergency Systems and Procedures

Summary of Contents for Micro 13-XD

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands