Page 26
MMAE16 - Operator’s Manual
January 2022
Secton 8 - Operatng Instructons
You will need:
Carpenter’s level
Straight piece of wood, at least 3.3 ft / 1 m long
Tape measure
Lay the piece of wood on the slope.
At the downhill end, lay the level on the top edge of the piece of wood and lift the end until the piece
of wood is level.
While holding the piece of wood level, measure the distance from the bottom of the piece of wood to
the ground.
Divide the tape measure distance (rise) by the length of the piece of wood (run) and multiply by 100.
Example:
Run = 12 ft / 3.6 m
Rise = 12 in / 0.3 m
12 in ÷ 144 in = 0.083 × 100 = 8.3%
0.3 m ÷ 3.6 m = 0.083 × 100 = 8.3%
•
•
•
•
ART_4983
If the slope exceeds the maximum slope or side slope rating, the machine must be winched or
transported up or down the slope. See Transport and Lifting section.
Operation from Ground with Controller
Maintain safe distances between operator, machine and fixed objects.
Be aware of the direction the machine will travel when using the controller.
Battery Level Indicator
Use the LED readout screen to determine the battery level.
FULL
LOW
ART_4984A
To Extend and Retract Platform
Press the platform lock pin pedal on the extension deck by foot.
Push the platform extension guardrail to extend the platform to the desired position. Do not
stand on the platform extension while trying to extend it.
Note:
Do not stand on the platform extension while trying to extend and retract it.
•
•
•
1.
2.
