Page 10
MMAE16 - Operator’s Manual
January 2022
Secton 4 - Hazards and Safety Rules
Maintain safe distances between the operator, the machine, and fixed objects.
Operation on Slopes Hazard
Do not drive the machine on a slope that exceeds the slope and side slope rating of the machine.
Slope rating applies to machines only in the stowed position.
MMAE16
Maximum Fore/Aft Slope
Rating Stowed Position
Maximum Side Slope
Rating Stowed Position
25%
10%
Note:
Slope rating is subject to ground conditions and adequate traction.
Fall Hazard
The guard rail system provides fall protection. If required by regulations during
operation, occupants in the platform must wear a full body harness with a
lanyard attached to an authorized lanyard anchorage point. Attach only one (1)
lanyard per lanyard anchorage point.
ART_4713
Keep the platform floor clear of debris.
Close the entry gate before operating.
Do not operate the machine unless the entry is securely closed.
Do not sit, stand or climb on the platform guard rails. Maintain a firm
footing on the platform floor at all times.
Do not climb down from the platform when raised.
ART_5801F
Do not exit the platform while raised. If a power failure occurs, have ground personnel activate the
emergency lowering switch.
Use extreme caution when entering or leaving platform. Be sure that the platform is fully lowered.
Face the machine, maintain “three point contact” with the machine, using two hands and one foot or
two feet and one hand during entry and exit.
Collision Hazard
Operators must comply with employer, job site and governmental rules
regarding the use of personal protective equipment.
Be aware of limited sight distance and blind spots when driving or operating.
The machine must be on a level surface or secured before releasing the
brakes.
ART_5801G
