Meanta CR2010CX, User Manual

Page: 7 / 38

7
1.3 The Remote Control
Use the remote control to control the digital TV receiver. Make sure that batteries
are installed correctly in the remote control.
1. Turn the digital TV receiver on or off.
2. Mute the sound. This button also can be used to change
the picture resolution. Press and hold this button until
the current resolution is displayed. Repeatedly press it
to change the resolution, then press the
EXIT button to
return it to the original button function.
3. Use the numeric buttons to enter numbers.
4. Subtitle : Display subtitles. See Displaying Subtitles.
5. Teletext : Display teletext pages. See Viewing Teletext.
6. Use these navigation buttons to navigate the menus
and interactive screens.
7. OK : Select an item. In addition, use this button to
display the channel list. See Channel List.
8. Display the list of files stored in a removable storage
device. See Playing Media Files.
9. MENU : Display menu. See The menu Screen. In addition, use this button to
return to the higher menu level.
10. EXIT : Return to the previous screen or close the current list or dialogue box.
11. FAV : Display the list of favourite channels.
12. EPG : Display the program guide. See TV Program Guide.
13. RECALL : Display the list of recently-viewed channels.
14. Use these buttons to control recording and playback. See Recording TV and
Playing Media Files.
15. Use these volume buttons to adjust the volume.
16. Use these channel buttons to change channels.
17. These colour buttons perform different functions, depending on what the
digital TV receiver is currently doing.
18. Use these buttons to scroll lists.
19. TV/Radio : Switch between TV channels and radio stations.
20.
INFO : Display information about the current program. Use these buttons to
watch two different channels at the same time. See Watching Two Channels
Simultaneously. Use these buttons to watch two different channels at the same
time. See Watching Two Channels Simultaneously.