Meanta CR2010CX, User Manual

Page: 12 / 38

12
2.7 Network Connection
Connect the receiver’s LAN port to the router using a
network cable. For details on how to configure the
network settings, see Network Settings.
3 Cable Search
Open the Settings > Cable Search menu.
There are two signal bars on the lower part of the screen. The signal level bar
indicates how strong the signal is, and the signal quality bar indicates how easy it is
to pick up.
To scan for all available channels, set Search Mode to Auto. Choose Search Type
and determine which types of channels to scan for.

All Service : Scan for all available TV and radio channels.

FTA Only : Scan only for free TV and radio channels.

TV Only : Scan only for free and pay TV channels.
To scan for a specific channel, set
Search Mode to Manual . Set these options for
the channel.

Frequency : Specify the channel
’
s frequency.

Symbol rate : Specify the channels
’
symbol rate.

QAM Mode : Specify the modulation method used for the channel.
Select Service Search to start channel scan.