www.Me3D.com.au
This Getting Started guide is provided and maintained by Me3D.com.au
Page
8
of
13
C
HECK YOUR Z
-
HEIGHT CALIBRATION
1.
Navigate to the Z Offset
parameter located in the Slice
Setting Tab->Printer-
>General. If it is not visible
check the “Show all Settings”
check box. For a new setup
this is set to 25mm to ensure
that if this procedure isn’t
completed, the printer will
not be damaged.
2.
You will have noticed a
label with a number on it on
the extruder fitted to your
machine. This is the Z Offset
height for that particular
extruder. Enter the newly
discovered Z Offset position
and press SAVE at the top
right to complete the setup.
