www.Me3D.com.au
This Getting Started guide is provided and maintained by Me3D.com.au
Page
11
of
13
G
ETTING STARTED WITH YOUR OWN PRINT
1.
To print a 3D object using
“MatterControl for Me3D”,
you'll first need an object to
print. Press the 'Add' button,
either at the bottom of the
Print Queue or near the top
of the application.
2.
A file dialog will open
allowing you to select a .STL,
.AMF or .GCODE file. Once
you've selected a file, it will
be added to your Print Queue
and available for printing.
3.
To begin a print, check to make sure that the bed is clear, then press 'Print'. You can pause or cancel a print by selecting
'Pause' or 'Cancel' once the print has begun. After a print has finished, you can choose to reprint the object or select
'Done' to remove it from your print queue.
