UNPACKING
When unpacking, check to make sure that all parts listed below are included. If any
parts are missing or broken, please call MDM Products at the number on the cover of this
manual as soon as possible.
BOX A - 87549
BOX B - 87548
part description Q’ty
part description Q’ty
1 Roof
Panel
6
2 Peak
Tube
3
3 Rafter
6
4 Side
Post
6
5 End
Base
Rails
4
6 Center
Base
Rails
2
7 Anchor
Stakes
8
8 Screw
90
9 Edge
Trim
1
roll
10 Foam
Tape
1
roll
ASSEMBLY
WARNING!
• Wear ANSI-approved safety impact goggles, heavy-duty work gloves, an ANSI-
approved hard hat and steel-toed work boots when assembling.
• Ladders are inherently dangerous.
If you are using a ladder to assemble this
product, make sure to read and adhere to the safety warnings and instructions as
recommended by the manufacturer/distributor of the ladder you are using.
• The Shelter must be supported by a proper to help prevent property damage and
injury in the event of strong winds or inclement weather. Wind and ground conditions
may vary from site to site, and may affect the practicality and effectiveness of
anchoring methods substantially. If you have any doubt regarding the stability of the
foundation you are to use, consult a professional. It is the customer’s responsibility to
properly anchor the Shelter. MDM Products cannot be held responsible for personal
injury, damage to the Shelter, or other property damage that occurs as a result of
improperly anchoring the Shelter.
• Check with local authorities to obtain all required building permits and to familiarize
yourself with any building codes that may apply.
note:
Many parts are assembled using the Screws (8). To properly install a screw, First mark
the installation spot using a spring loaded punch (sold separately), to help the point
dig into the metal. All screws should be installed near the center of the rails
SC071008JJ
Please DO NOT return unit to store or dealer. For all questions or shortages please contact
PAGE 4
Customer Service at: 800-447-7079 or 203-877-7070
Summary of Contents for SC071008JJ
Page 1: ......
