www.marketdirect.com.au
I
Ph: 1300 494 494
I
©Copyright
I
P a g e
|
36
Hitch
Cruisemaster DO35
To ensure a long service life we recommend the following periodic maintenance procedures.
1.
Always keep Tow Pin and Universal mating surfaces clean and lightly lubricated.
2.
Check condition of Tow Pin O-Ring and replace if necessary (Part No. 18D-DO35-101).
3.
Regularly lubricate grease points with multi-purpose grease.
4.
Periodic adjustment of Slotted Nut & Pin may be required of coupling head loosens excessively and
should be a competent person.
5.
Flush with clean water if locking mechanism does not open fully due to dirt ingress.
Ball Bearing Slides
To lubricate and protect from corrosion the ball bearing slides should be lubricated with a small amount of
general purpose grease every 6 months.
Correct Use of Your Electric Brakes
Your trailer brakes are designed to work in synchronisation with your tow vehicle brakes. Never use your tow
vehicle or trailer brakes alone to stop the combined load. Your trailer and tow vehicle will seldom have the
correct amperage flow to the brake magnets to give you comfortable, safe braking unless you make proper
brake system adjustments. Changing trailer load and driving conditions, as well as uneven alternator and battery
output, can mean unstable current flow to your brake magnets. It is therefore imperative that you maintain and
adjust your brakes as set forth in the controller manual, use a properly modulated brake controller and perform
the synchronisation/adjustment procedure recommended by the brake controller supplier.
Important Safety Notice
Proven and in some cases approved service methods and correct repair procedures
are essential for the safe, reliable operation of the brakes, suspension, and axles as
well as the personal safety of the individual doing the work. This manual intends to
provide general directions for performing service and repair work with tested, effective
techniques. By following these guidelines, it will help assure
reliability. The numerous variations in procedures, techniques, tools, and parts for servicing axles, as well as in the
skill of the individual doing the work will determine outcomes. This manual cannot possibly anticipate all such
variations nor provide advice or cautions as to each. Accordingly, anyone who departs from the instructions
provided in this manual must first establish that they neither compromise their personal safety nor the vehicle
integrity by their choice of methods, tools, or parts.
*If at all in doubt please refer all repairs and maintenance to a suitably qualified or experienced mechanical
repairer.
*Market Direct Campers accepts no liability for personal injury, loss or damage resulting from incorrect
applications, methods, and failure to perform maintenance safely and correctly.
Summary of Contents for Robson XTT 2015
